Resultado da Busca
Internet Protocol Security (IPsec) is a set of protocols defined by the Internet Engineering Task Force (IETF) to secure packet exchange over unprotected IP/IPv6 networks such as Internet. IPsec protocol suite can be divided in following groups: Internet Key Exchange (IKE) protocols. Dynamically generates and distributes cryptographic keys for ...
This manual provides an introduction to RouterOS built-in powerful scripting language. Scripting host provides a way to automate some router maintenance tasks by means of executing user-defined scripts bounded to some event occurrence. Scripts can be stored in Script repository or can be written directly to console .
Manual:TR069-client. TR069-client implements CPE WAN Management Protocol (CWMP) for remote device management, which is standardized by the Broadband Forum (BBF). CWMP works over IP network using HTTP (S) to communicate with an Auto Configuration Server (ACS), which can monitor, configure attributes and update the firmware of a remote device.
Router keeps routing information in several separate spaces: FIB (Forwarding Information Base), that is used to make packet forwarding decisions. It contains a copy of the necessary routing information. Each routing protocol (except BGP) has it's own internal tables. This is where per-protocol routing decisions are made.
RouterOS Documentation. This document describes RouterOS, the operating system of MikroTik devices. Documentation applies for the latest stable RouterOS version. Also available in the documentation in PDF format for offline use (updated monthly).
PCC takes selected fields from IP header, and with the help of a hashing algorithm converts selected fields into 32-bit value. This value then is divided by a specified Denominator and the remainder then is compared to a specified Remainder, if equal then packet will be captured. You can choose from src-address, dst-address, src-port, dst-port ...
For icmp, tcp, udp traffic we will create chains, where will be dropped all unwanted packets: /ip firewall filter. add chain=forward protocol=tcp connection-state=invalid \. action=drop comment="drop invalid connections". add chain=forward connection-state=established action=accept \.
