Resultado da Busca
Package required: security. Internet Protocol Security (IPsec) is a set of protocols defined by the Internet Engineering Task Force (IETF) to secure packet exchange over unprotected IP/IPv6 networks such as Internet. IPsec protocol suite can be divided in following groups: Internet Key Exchange (IKE) protocols.
Для того, чтобы пробросить порты надо в меню выбрать IP => Firewall и далее вкладку «NAT». Нажать значок + для добавления нового правила. Далее необходимо выполнить следующие настройки: Вкладка General ...
Atualizações. Duas boas práticas são, consecutivamente, manter sempre seu roteador atualizado e ler as change logs antes de atualizá-lo. Caso não leia os change logs, ao menos mantenha sempre seu roteador atualizado para a última versão sugerida pelo fabricante, disponível neste link .
Summary. Sub-menu: /ip firewall nat. Network Address Translation is an Internet standard that allows hosts on local area networks to use one set of IP addresses for internal communications and another set of IP addresses for external communications. A LAN that uses NAT is referred as natted network. For NAT to function, there should be a NAT ...
This manual introduces you with commands which are used to perform the following functions: system configuration reset. The configuration backup can be used for backing up MikroTik RouterOS configuration to a binary file, which can be stored on the router or downloaded from it using FTP for future use. The configuration restore can be used for ...
RoMON stands for "Router Management Overlay Network". RoMON works by establishing independent MAC layer peer discovery and data forwarding network. RoMON packets are encapsulated with EtherType 0x88bf and dst-MAC 01:80:c2:00:88:bf and its network operates independently from L2 or L3 forwarding configuration. When RoMON is enabled, any received ...
The simplest way to setup HotSpot server on a router is by /ip hotspot setup command. Router will ask to enter parameters required to successfully set up HotSpot. When finished, default configuration will be added for HotSpot server. [admin@MikroTik] /ip hotspot> setup. Select interface to run HotSpot on.
