Resultado da Busca
Overview. The 'WiFi' configuration menu, introduced in RouterOS 7.13, is a RouterOS menu for managing Wi-Fi 5 wave2 and newer WiFi interfaces. Devices with compatible radios also require either the 'wifi-qcom-ac' driver package (for 802.11ac chipsets) or the 'wifi-qcom' driver package for 802.11ax and newer chipsets.
- mAP lite
The mAP is a small wireless access point with one ethernet...
- mAP lite
- Overview
- Access List
- Align
- Connect List
- Nstreme
- Nstreme Dual
- Registration Table
- Security Profiles
- Virtual Interfaces
- Sniffer
Standards: Package: wireless RouterOS wireless comply with IEEE 802.11 standards, it provides complete support for 802.11a, 802.11b, 802.11g, 802.11n and 802.11ac as long as additional features like WPA, WEP, AES encryption, Wireless Distribution System (WDS), Dynamic Frequency selection (DFS), Virtual Access Point, Nstreme and NV2 proprietary prot...
Sub-menu: /interface wireless access-list Access list is used by access point to restrict allowed connections from other devices, and to control connection parameters.The default behaviour of the access list is to allow connection. Access list rules are processed one by one until matching rule is found. Then the action in the matching rule is execu...
Sub-menu: /interface wireless align Align tool is used to help in alignment devices running this tool.
Sub-menu: /interface wireless connect-list connect-list is used to assign priority and security settings to connections with remote access points, and to restrict allowed connections.connect-list is an ordered list of rules. Each rule in connect-list is attached to specific wireless interface, specified in the interface property of that rule (this ...
Sub-menu: /interface wireless nstreme This menu allows to switch a wireless card to the nstreme mode. In this case the card will work only with nstreme clients.
Sub-menu: /interface wireless nstreme-dual Two radios in nstreme-dual-slave mode can be grouped together to make nstreme2 Point-to-Point connection. To put wireless interfaces into a nstreme2 group, you should set their mode to nstreme-dual-slave. Many parameters from /interface wireless menu are ignored, using the nstreme2, except: 1. frequency-mo...
Sub-menu: /interface wireless registration-table In the registration table, you can see various information about currently connected clients. It is used only for Access Points. All properties are read-only.
Sub-menu: /interface wireless security-profiles Security profiles are configured under the /interface wireless security-profiles path in the console, or in the "Security Profiles" tab of the "Wireless" window in the WinBox. Security profiles are referenced by the Wireless interface security-profile property and security-profileproperty of Connect L...
VirtualAP
It is possible to create virtual access points using the add command in the wireless menu. You must specify the master-interfacewhich the virtual interface will belong to. If "master-interface" mode is "station", Virtual AP will work only when "master-interface" will be active. The Virtual AP can have it's own SSID and Security Profile. Virtual AP interface will only work if master interface is in ap-bridge, bridge, stationor wds-slave mode. It works only with 802.11 protocol, Nv2 is not supp...
Virtual Clients
It is also possible to create virtual clients and have both an AP and a Client on the same physical interface. This allows to make a repeater setup with only using one hardware card. The process of configuration is exacly the same as above, but use mode station: To create a new virtual-client: /interface> wireless add mode=station master-interface=wlan1 ssid=where-to-connect security-profile=your-profile (such security profile first needs to be created)
Sub-menu: /interface wireless sniffer Wireless sniffer allows to capture frames including Radio header, 802.11 header and other wireless related information.
User Manuals. Enter the name of the product located on the case label to find user manual. Or browse the product tree on the left. Ethernet routers. Switches. Wireless systems. Wireless for home and office. LTE products. Data over Powerlines. IoT products. RouterBOARD. Enclosures. Interfaces. Accessories. Antennas. Choose language translations.
Manual:Making a simple wireless AP. This article will show a very quick overview for beginners on setting up a Wireless Access Point in RouterOS Winbox graphical configuration tool.
PDF manual · 8 pages English. manual Mikrotik Wireless Wire. wAP 60G series. Wireless Wire RBwAPG-60adkit. wAP 60G RBwAPG-60ad. wAP 60G AP RBwAPG-60ad-A. wAP 60Gx3 AP RBwAPG-60ad-SA. wAP60G devices work in the 60GHz wireless spectrum, the operating temperature of these devices is from -40 °C up to +70 °C. The devices have a one-
- (1)
- Mikrotik
- Access Point
- Wireless Wire | WIRELESS WIRE
User Manuals. 60 GHz products. Wireless Wire Dish. The Wireless Wire Dish is a set of two LHG 60G devices that work in the 60 GHz wireless spectrum. Factory configured in pairs for an easy first start. Safety Warnings.
