Yahoo Search Busca da Web

Resultado da Busca

  1. MikroTik RouterOS implements OSPF version 2 (RFC 2328). The OSPF protocol is the link-state protocol that takes care of the routes in the dynamic network structure that can employ different paths to its subnetworks. It always chooses shortest path to the subnetwork first. Instance. Sub-menu: /routing ospf instance

  2. There are three basic elements of OSPF configuration: Enable OSPF instance. OSPF area configuration. OSPF network configuration. General information is configured in /routing ospf instance menu. For advanced OSPF setups, it is possible to run multiple OSPF instances.

  3. OSPF is Interior Gateway Protocol (IGP) designed to distribute routing information between routers belonging to the same Autonomous System (AS). The protocol is based on link-state technology that has several advantages over distance-vector protocols such as RIP: no hop count limitations;

  4. Manual:Routing/OSPF. Page. This page was last edited on 11 March 2010, at 12:09.

  5. Manual:OSPF Forwarding Address. Applies to RouterOS: v3, v4, v5 +. Lets assume that router R1 has static route to external network 192.168.0.0/24. OSPF is running between R1,R2 and R3 and static route is distributed across the OSPF network.

  6. Manual:OSPF and Point-to-Point interfaces. OSPF configuration on PPP interfaces often is a subject to misunderstanding. You need to keep in mind two things: There is no need to explicitly configure an interface in "/routing ospf interface" to start running OSPF on it.

  7. Contents. 1 OSPF routes redistribution, summarization and stub area complex example. 1.1 Basic OSPF configuration. 1.2 Redistributing static routes and summarization. 1.3 Area 1 in stub configuration. OSPF routes redistribution, summarization and stub area complex example. Packages required: routing. Let's look at the network topology shown below.