Resultado da Busca
PCQ will have burst implementation identical to Simple Queues and Queue Tree. PCQ parameters: pcq-burst-rate (number) : maximal upload/download data rate which can be reached while the burst for substream is allowed. pcq-burst-threshold (number) : this is value of burst on/off switch. pcq-burst-time (time) : period of time, in seconds, over ...
Summary. Sub-menu: /ip firewall nat. Network Address Translation is an Internet standard that allows hosts on local area networks to use one set of IP addresses for internal communications and another set of IP addresses for external communications. A LAN that uses NAT is referred as natted network. For NAT to function, there should be a NAT ...
Все о MikroTik на русском языке. Характеристики, списки совместимости и сравнение оборудования. Информация по настройке: маршрутизации, Wi-Fi, VPN, Firewall, VLAN, QoS и много другого. Рекомендации по обучению: онлайн и очному.
PCC takes selected fields from IP header, and with the help of a hashing algorithm converts selected fields into 32-bit value. This value then is divided by a specified Denominator and the remainder then is compared to a specified Remainder, if equal then packet will be captured. You can choose from src-address, dst-address, src-port, dst-port ...
How to reset configuration. 1) unplug the device from power. 2) press and hold the button right after applying power. Note: hold the button until LED will start flashing. 3) release the button to clear configuration. Note: If you wait until LED stops flashing, and only then release the button - this will instead launch Netinstall mode, to ...
Fetch is one of the console tools in Mikrotik RouterOS. It is used to copy files to/from a network device via HTTP, FTP or SFTP (Support for SFTP added on v6.45), it can also be used to sent POST/GET requests and send any kind of data to a remote server. HTTPS protocol is supported; by default no certificate checks are made, but setting check ...
Queues are used to limit and prioritize traffic: limit data rate for certain IP addresses, subnets, protocols, ports, and other parameters. limit peer-to-peer traffic. prioritize some packet flows over others. configure traffic bursts for faster web browsing. apply different limits based on time.
