Resultado da Busca
RouterOS. Getting started. First Time Configuration. Connecting to the Router. Router without Default Configuration. Configuring IP Access. Configuring Internet Connection. Dynamic Public IP. Static Public IP. PPPoE Connection. Verify Connectivity. Protecting the Router. User Password Access. MAC Connectivity Access. Neighbor Discovery.
1 Summary. 2 Connecting wires. 3 Configuring router. 3.1 Logging into the router. 3.2 Router user accounts. 3.3 Configure access to internet. 3.3.1 DHCP Client. 3.3.2 Static IP Address. 3.3.3 Configuring network address translation (NAT) 3.3.4 Default gateway. 3.3.5 Domain name resolution. 3.3.6 SNTP Client. 3.4 Setting up Wireless.
Summary. Several IPv4 and IPv6 related kernel and system-wide parameters are configurable. IPv4 Settings. Sub-menu: /ip settings. Read-Only Properties. IPv6 Settings. Sub-menu: /ipv6 settings. Changing /ipv6 settings will not dynamically remove the old SLAAC configuration present on your router. A reboot is required to apply the new settings.
Quickset is a simple configuration wizard page that prepares your router in a few clicks. It is the first screen a user sees, when opening the default IP address 192.168.88.1 in a web browser. Quickset is available for all devices that have some sort of default configuration from factory.
This tutorial is intended to help you understand the MikroTik RouterOS and to show you how to configure a MikroTik router from start to finish with some of the most commonly used settings.
- Liam O'leary
Configuration Import. Auto Import. Import troubleshooting. Configuration parts to watch out for in exported .rsc files. Startup delay. Configuration Reset. Overview. This article describes a set of commands used for configuration management. Configuration Undo and Redo.
Connecting to a device. 1) Run the Winbox utility. 2) Navigate to "Neighbors" 3) See if Winbox finds your Router and it's MAC address. Info: Winbox neighbor discovery will discover all routers on the broadcast network. 4) If you see your router on the list, connect to it by clicking on IP/MAC address and pressing Connect button.
