Resultado da Busca
Applies to RouterOS: v6.34+. The Dude is a free application by MikroTik, which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and execute actions based on device state changes.
To manage IP addresses of the router open 'IP -> Address'. You will have one address here - address of your local area network (LAN) 192.168.88.1 one you are connected to router. Select Add new to add new static IP address to your router's configuration. You have to fill only fields that are marked.
The console is used for accessing the MikroTik Router's configuration and management features using text terminals, either remotely using serial port, telnet, SSH or console screen within Winbox, or directly using monitor and keyboard. The console is also used for writing scripts. This manual describes the general console operation principles.
Connect the Ethernet cable from the device to the POE port of the POE adapter. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow. Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Direct-input power jack (5.5mm outside and 2mm inside, female, pin positive plug) accepts 11-30V DC. The first Ethernet port accepts passive PoE input 11-30V DC. Power consumption 19 W. Connecting to a PoE Adapter: Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
Quickstart. Please follow these quick steps to set up your device: Connect your ISP Ethernet cable to the Ethernet port 1. Connect the device to the power source (see "Powering"). Open network connections on your PC, mobile phone or other device and search for MikroTik wireless network and connect to it.
Connecting to a device. 1) Run the Winbox utility. 2) Navigate to "Neighbors". 3) See if Winbox finds your Router and it's MAC address. Info: Winbox neighbor discovery will discover all routers on the broadcast network. 4) If you see your router on the list, connect to it by clicking on IP/MAC address and pressing Connect button.
