Resultado da Busca
Netinstall is a tool designed for Windows operating systems to reinstall MikroTik devices running RouterOS (except for non-MikroTik x86 devices). Netinstall re-formats the device's disk and copies over fresh files on to the system's disk, this can solve multiple issues when your device is not working properly. Always try using Netinstall if you ...
All MikroTik devices must be professionally installed. This Quick Guide covers the model: RBFTC11. This is a network device. You can find the product model name on the case label (ID). Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.
First use. Connect your Internet cable to one of the two ports labeled "Internet", depending on whether you will use an SFP module or Ethernet. Choose your powering solution, please see the Powering section for possibilities. Connect your direct input power jack if not using POE, to start up the device.
Connect the Ethernet cable from the device to the POE port of the POE adapter. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow. Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Mounting and configuration of this device should be done by a qualified person. Grounding screw is located on the backside of the device case, please connect it accordingly to efficient ground. When mounting on the wall, please ensure that cable feed is pointing downwards. The IPX rating scale of this device is IPX0.
Quickstart. Please follow these quick steps to set up your device: Connect your ISP Ethernet cable to the Ethernet port 1. Connect the device to the power source (see "Powering"). Open network connections on your PC, mobile phone or other device and search for MikroTik wireless network and connect to it.
CRS305-1G-4S+IN. This device is a 10 Gigabit SFP+ switch, powered by RouterOS. It features two redundant DC inputs. The device has four SFP+ cages (modules are not included) for high-performance 10GbE connectivity (1.25 Gbit modules are also supported) and a 1GbE copper port for management. The device is ready to use as a switch.
