Yahoo Search Busca da Web

Resultado da Busca

  1. Contents. 1 Reset from RouterOS. 2 Using reset button. 2.1 How to reset configuration. 3 Jumper hole reset. 4 Jumper reset for older models. Note: RouterOS password can only be reset by reinstalling the router or using the reset button (or jumper hole) in case the hardware is RouterBOARD.

  2. The RouterOS password can only be reset by reinstalling the RouterOS or using the reset button (or jumper hole) in case the hardware is RouterBOARD. For X86(CHR) devices, only a complete reinstall will clear the password, along with any other configuration.

  3. Resetar um roteador geralmente é uma tarefa bem simples: se você ainda tiver acesso ao setup do roteador, basta ir em "System" e depois "Reset Configuration". Se você tiver perdido acesso ao roteador, encontre um botão (geralmente próximo à entrada de energia) com o texto "RESET" ou "RES".

  4. It is also possible to use the backup booter by turning on the device, with the RESET button pushed. It is only possible to upgrade the main RouterBOOT, so in case of failure, you can use the backup booter to start the device and downgrade the main loader.

  5. To use the reset button, hold it and then turn on the device, while still holding the button. Release the button when the green LED starts flashing, to reset the RouterOS configuration. To not load the backup bootloader, you can start holding the button after power is already applied.

  6. 12 de abr. de 2015 · Otávio Miranda. 119K subscribers. Subscribed. 357. 40K views 9 years ago Mikrotik. Confira as camisetas mais legais da Internet em http://bit.ly/2C8R0D5 Aprenda a zerar as configurações do...

    • 4 min
    • 41K
    • Otávio Miranda
  7. On MikroTik, there are 2 ways to do the reset: Soft reset: in case you have access to the router (for example via Winbox) Hardware reset: in case you cannot access to the router. I will show you both ways in this topic. Let’s start directly with the LAB.