Resultado da Busca
Contents. 1 Reset from RouterOS. 2 Using reset button. 2.1 How to reset configuration. 3 Jumper hole reset. 4 Jumper reset for older models. Note: RouterOS password can only be reset by reinstalling the router or using the reset button (or jumper hole) in case the hardware is RouterBOARD.
Run the command "/system reset-configuration" from a command-line interface; Do it from the System -> Reset Configuration menu in the graphical user interface; Using Reset Button. RouterBOARD devices are fitted with a reset button which has several functions:
Resetar um roteador geralmente é uma tarefa bem simples: se você ainda tiver acesso ao setup do roteador, basta ir em "System" e depois "Reset Configuration". Se você tiver perdido acesso ao roteador, encontre um botão (geralmente próximo à entrada de energia) com o texto "RESET" ou "RES".
To use the reset button, hold it and then turn on the device, while still holding the button. Release the button when the green LED starts flashing, to reset the RouterOS configuration. To not load the backup bootloader, you can start holding the button after power is already applied.
For upgrade instructions, follow the separate instructions in RouterBOARD#UpgradingRouterBOOT. RouterBOARD reset button. RouterBOOT reset button has three functions: Hold this button during boot time until the LED light starts flashing, and release the button to reset the RouterOS configuration (total 5 seconds)
12 de abr. de 2015 · 357. 40K views 9 years ago Mikrotik. Confira as camisetas mais legais da Internet em http://bit.ly/2C8R0D5 Aprenda a zerar as configurações do Mikrotik para o padrão de fábrica (dar um...
- 4 min
- 41K
- Otávio Miranda
To clear all the user configuration and reset the device, follow these steps: Using the reset button on your device. Make sure your device is turned off, but have the power adapter ready to be plugged in. Hold the reset button. While still holding the reset button, plug in the power adapter.
