Resultado da Busca
7 de mai. de 2024 · This is the default firewall behavior of "defconf". If you want to block inter- vlan communication, you can now do this: * Create a new interface list, ISOLATED_VLAN for instance, and add the interfaces that you don't want to give access to all other interfaces of your LAN to it: Code: Select all. /interface list.
6 de mai. de 2024 · The issue was on the client side; there was a Mikrotik Hex in between the main router with some pre-configured settings, causing connection problems with the client, even DHCP wasn't working anymore. Today, I connected directly to the Huawei 5G router, using a regular switch instead of the Mikrotik Hex, with all the firewalls set up, and the result is that everything is working great.
10 de mai. de 2024 · That's not my case here, this is disabled and not wanted, but still the weirdest thing is happening as I get bridged traffic reach the forward table in the firewall! For now I believe this must be a misconfiguration rather than a bug, but there's so little config in bridges that I can't figure what to try.
7 de mai. de 2024 · This is the default firewall behavior of "defconf". If you want to block inter-vlan communication, you can now do this: * Create a new interface list, ISOLATED_VLAN for instance, and add the interfaces that you don't want to give access to all other interfaces of your LAN to it: Code: Select all. /interface list.
12 de mai. de 2024 · Im using a Mikrotik hap ac3 router with firmware 7.14.3 I have to tag isp traffic to vlan 40 in order to use my own router with my isp. I found another topic on this forum which was doing something very similar but i wanted to check that things are set up all correctly with my firewall and wan/lan configuration.
6 de mai. de 2024 · The issue was on the client side; there was a Mikrotik Hex in between the main router with some pre-configured settings, causing connection problems with the client, even DHCP wasn't working anymore. Today, I connected directly to the Huawei 5G router, using a regular switch instead of the Mikrotik Hex, with all the firewalls set up, and the result is that everything is working great.
7 de mai. de 2024 · In my previous post I've quoted and underlined the reason why the Fasttrack rule alone is not enough, you must pair it with a rule with the same condition, but with action=accept. That was the case in the default configuration (defconf) firewall, but you have modified that rule and moved it to the bottom, below the drop rules.
