Resultado da Busca
add address=192.168.88.1/24 interface=bridge1. It is required to add VLAN 1 to ports from which you want to allow the access to the router/switch, for example, to allow access from access ports ether3, ether4 add this entry to the VLAN table: /interface bridge vlan. add bridge=bridge1 untagged=ether3,ether4 vlan-ids=1.
Package: ppp. Secure Socket Tunneling Protocol (SSTP) transports a PPP tunnel over a TLS channel. The use of TLS over TCP port 443 allows SSTP to pass through virtually all firewalls and proxy servers. SSTP connection mechanism. TCP connection is established from client to server (by default on port 443); SSL validates server certificate.
To disable the DDNS service: /ip cloud set ddns-enabled=no. Note: As soon as you disable the service, your device sends a command to the MikroTik's Cloud server to remove the stored DNS name. To manually trigger a DNS update: [admin@MikroTik] > /ip cloud force-update.
Summary. MikroTik RouterOS implements OSPF version 2 (RFC 2328). The OSPF protocol is the link-state protocol that takes care of the routes in the dynamic network structure that can employ different paths to its subnetworks. It always chooses shortest path to the subnetwork first.
MikroTik RouterOS 7.14.2. Дата выхода: 27 марта 2024. Изменения: defconf - do not override default DHCP server lease time; defconf - fixed 5ghz-ax channel width for L11, L22 devices; ethernet - fixed interface disable for CRS326-4C+20G+2Q; ethernet - improved port speed downshift functionality for CRS326-4C+20G+2Q;
This example explains how to use multiple gateways with one taking over when first fails. It begins with adding the gateways. Set bigger distance value for the secondary one, and check-gateway for the first one: /ip route add gateway=192.168.1.1 check-gateway=ping. /ip route add gateway=192.168.2.1 distance=2. That's all, there are no more steps!
Virtual Local Area Network (VLAN) is a Layer 2 method that allows multiple Virtual LANs on a single physical interface (ethernet, wireless, etc.), giving the ability to segregate LANs efficiently. You can use MikroTik RouterOS (as well as Cisco IOS, Linux and other router systems) to mark these packets as well as to accept and route marked ones.
