Resultado da Busca
Router keeps routing information in several separate spaces: FIB (Forwarding Information Base), that is used to make packet forwarding decisions. It contains a copy of the necessary routing information. Each routing protocol (except BGP) has it's own internal tables. This is where per-protocol routing decisions are made.
In this setup we will be connecting a PTP configuration using a Dual Setup and OSPF ( Open Shortest Path First ). The requirements for this set up is to have a board that supports at least 02 radios. If you would like to double the bandwidth and redundancy, take a look at this Tutorial with Dual Radios. The advantages for this setup are:
MPLS or Multiprotocol Label Switching is used widely for it's performance and traffic engineering possibilities. While MPLS can seem complex, this example will show how to get a very basic MPLS setup up and running. In this example we will be focusing ONLY on making traffic between CE1 and CE2 routable and route it using MPLS.
Manual:OSPFv3 with Quagga. In this example we demonstrate interoperability of MikroTik 3.x with Quagga in multi-area OSPF setup with load balancing. RouterOS version 3.16 and Quagga 0.99.11 are used respectively.
For example, on R5 OSPF is configured with the following commands: /routing ospf instance set redistribute-connected=as-type-1 /routing ospf network add area=backbone network=4.4.4.0/24 /routing ospf network add area=backbone network=5.5.5.0/24 On other routers OSPF is configured in similar way. This yields routing table on R5 like this:
6 de fev. de 2010 · /routing ospf network add network=10.1.1.0/24 /routing ospf interface add interface=ether1 add interface=all passive=yes Nothing complicated. <- Smart Ass Regards, Maris-----Hello, If OSPF is not seeing neighbors after setting interfaces to passive, it means that you set passive interface which shouldn't be passive. Send us supout file from the ...
MikroTik RouterOS 7.12.1. Дата выхода: 17 ноября 2023. Изменения: defconf - fixed bogus wifi password on certain Audience devices; ipv6 - do not send out IPv6 RA deprecate message for re-used prefix; ospf - fixed LSA Type3 advertisement for OSPFv2; ppc - fixed RouterOS bootup (introduced in v7.12);
