Resultado da Busca
Wireless for home and office. cAP. cAPCeiling AP, Dual-Chain 2.4GHz, 650MHz CPU, RouterOS L4, 802.3at/af support. RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.
- cAP AC
The cAP ac is a very capable and powerful wireless access...
- Products: cAP ax
But what’s more important than speed is the stability. Our...
- cAP AC
Compre Mikrotik- Routerboard Cap Rbcap2Nd Celling Ap no GrupoTek! As melhores ofertas e condições de pagamento. Descubra a melhor forma de comprar online!
- MIKROTIK
- Safety Warnings
- Connecting
- Removing Mounting Ring
- Powering
- Mounting
- Configuration
- Expansion Slots and Ports
- Reset Button
- Mode Button
- Led Indicators
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. Ultimate disposal of this product should be handled according to all national laws and regulations. The Installation of the equipment must comply with local and national electrical codes. Th...
Remove metal ring see Removing mounting ring;Connect POE to the Ethernet port 1, please see the Poweringsection for instructions on how to connect POE.Set your computer IP configuration to automatic(DHCP).The device wireless access point mode is enabled by default.The Mounting ring comes installed on the device, in order to access Ethernet ports please remove it by turning it counterclockwise and the ring will be released.
The device accepts power from the Ethernet port, so you must either use the included passive PoE injector or make sure your switch supports passive or 802.3af/at PoE output. 1. Ethernet port accepts 12-57 V DC ⎓(802.3af/at or passive PoE). The power consumption under maximum load can reach 13 W. Connecting to a POE Adapter: 1. Connect the Ethernet ...
It is possible to attach the device to a wall or ceiling, using the provided mounting bracket on the back of the unit: 1. Attach the mounting bracket to the wall or ceiling with provided three screws; 2. Use 5 mm drill bit if necessary with provided dowels; 3. Connect needed cables to the device; 4. If needed second mounting bracket can be used for...
By default, the device is configured as a wireless access point, with the first ethernet port (Eth1) configured as a DHCP client, and the second interface bridged together with the wireless interface. A DHCP server is configured on the bridge interface. Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as up...
Two 10/100/1000 Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for connecting to other network devices. The Eth2 p...Integrated Wireless 2.4 GHz 802.11b/g/n, supports AP/CPE/P2P/repeater modes.Integrated Wireless 5 GHz 802.11a/n/ac.The reset button has three functions: 1. Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). 2. Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds). 3. Or Keep holding t...
There are two mode buttons on this unit, but they both are performing the same action. The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS script. You can also disable this button. By default, the buttons will enable "dark mode", which disables beeps and LED lights. The mode button can be co...
There are seven LED lights on the unit, which can be controlled in RouterOS software, or disabled altogether. 1. User – user-configurable led for any desired script. 2. 5G – 5GHz interface activity. 3. 2G – 2.4 GHz interface activity. 4. E2 – Ethernet 2 connected. 5. E1 – Ethernet 1 connected. 6. PoE LED indicates that the ETH2 port is currently po...
Comprar. Calcule seu Frete Veja preços e prazos para entrega. Não sei meu CEP! Confira a Descrição. cAP XL AC. O AP de teto com esteróides! Nosso campeão de vendas cAP está de volta e mais forte do que nunca. Em comparação com os modelos cAP anteriores, a antena de alto ganho aprimorada aumenta a área coberta em até 100%.
MIKROTIK ROUTERBOARD ACCESS POINT CAP AC RBCAPGI-5ACD2ND. O cAP ac é um ponto de acesso sem fio muito capaz e poderoso que fica lindo em paredes e tetos. O rádio sem fio de banda dupla simultânea suporta dual chain de 2 GHz 802.11b/g/n e 5 GHz no padrão /n/a e fornece cobertura de 360 graus em torno dele.
