Resultado da Busca
5 de abr. de 2020 · Re: DynDNS Script from Mikrotik Wiki (correction) by Jotne » Mon Apr 06, 2020 10:12 am. You can use MikroTik Colud DNS, its free. Then you can point your dyndns to the MikroTiok clod DNS name. (if its possible) Or drop dyndns and only use Mikrotik Cloud DNS as your public DNS name. IP->Cloud [x] DDNS Enable.
Bruteforce login prevention. To stop SSH/FTP attacks on your router, follow this advice. This configuration allows only 10 FTP login incorrect answers per minute. in /ip firewall filter. add chain=input protocol=tcp dst-port=21 src-address-list=ftp_blacklist action=drop \. comment="drop ftp brute forcers".
Description. IPv4 FastTrack handler is automatically used for marked connections. Use firewall action "fasttrack-connection" to mark connections for FastTrack. Currently only TCP and UDP connections can be actually FastTracked (even though any connection can be marked for FastTrack). IPv4 FastTrack handler supports NAT (SNAT, DNAT or both).
5 de abr. de 2020 · Re: DynDNS Script from Mikrotik Wiki (correction) by Jotne » Mon Apr 06, 2020 10:12 am. You can use MikroTik Colud DNS, its free. Then you can point your dyndns to the MikroTiok clod DNS name. (if its possible) Or drop dyndns and only use Mikrotik Cloud DNS as your public DNS name. IP->Cloud [x] DDNS Enable.
Application Examples Setup Overview. Assume that Office public IP address is 2.2.2.2 and we want two remote OVPN clients to have access to 10.5.8.20 and 192.168.55.0/24 networks behind office gateway.
To make this possible, follow these steps: Make sure that you do not have IP addresses on interfaces which will be enslaved for bonding interface! Add bonding interface on Router1: [admin@Router1] interface bonding> add slaves=ether1,ether2. And on Router2: [admin@Router2] interface bonding> add slaves=ether1,ether2.
This example explains how to use multiple gateways with one taking over when first fails. It begins with adding the gateways. Set bigger distance value for the secondary one, and check-gateway for the first one: /ip route add gateway=192.168.1.1 check-gateway=ping. /ip route add gateway=192.168.2.1 distance=2. That's all, there are no more steps!
